How to Reset the 4345mfp Messages
by
Jim Bethke · Parts Now!
·
October 1, 2008
- page(s): 16
Recently we have been getting more and more calls asking how to reset both the ADF and user maintenance messages on the HP 4345mfp and M4345mfp.
Here are the procedures:
To reset the fuser maintenance kit counter
1) Turn the MFP off and then on.
2) When the memory count appears on the display, press and hold 6 until all three LEDs flash once and then stay on. (This might take up to 20 seconds.)
3) Release 6 and then press 3 once.
4) Press 6 to select NEW MAINTENANCE KIT.
5) The MFP completes its initialization sequence. The maintenance-kit counter is automatically reset.
The printer maintenance kit # Q5998-67904* includes the following items:
- Fuser #RM1-0101 qty 1
- Transfer roller #RM1-1110 qty
- Feed roller #RM1-0037 qty 8
- MP tray pick up roller #RL1-0019 qty 1
- MP tray separation pad #RL1-0007 qty 1
Installation instructionsTo reset the ADF maintenance kit count
1) Turn the MFP off and then on.
2) When the memory count appears on the display, press and hold 6 until all three LEDs flash once and then stay on. (This might take up to 20 seconds.)
3) Release 6 and then press 3 twice.
4) Press 6 to select NEW DOCUMENT FEEDER KIT.
5) The MFP completes its initialization sequence. The ADF maintenance-kit counter is automatically reset.
The ADF maintenance kit # Q5997-67901 includes the following items:
- One pick-up roller assembly #PF...
Full articles are available online six months after their original print date to online subscribers. This article is available in its entirety only in print to RECHARGER Magazine subscribers. Subscribe today to start your print subscription.
This article will be available online on 04/01/2009
